Decision rule applied to all calibration certificates: MadgeTech Calibration Laboratory uses the shared risk approach as defined in ILAC G8 when making compliance statements.
Click here to see our current certificate and full scope of accreditation.
The following table provides the standard calibration points and the calibration certificate type provided for each MadgeTech data logger.
| Product | Standard Calibration Points | Certificate Type |
|---|---|---|
| AVS140-1 | This product is a system, you must calibrate components separately. See HiTemp140. | N/A |
| AVS140-6 | This product is a system, you must calibrate components separately. See HiTemp140, PR140. | N/A |
| Bridge101A-1000mV | 3 calibration points: - Voltage at 0 mV - Voltage at 1003 mV - Voltage at -1003 mV | Standard Certificate |
| Bridge101A-150mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| Bridge101A-30mV | 3 calibration points: - Voltage at 0 mV - Voltage at 24 mV - Voltage at -24 mV | Standard Certificate |
| Bridge120-1000mV | 3 calibration points: - Voltage at 0 V - Voltage at 1 V - Voltage at -498.0025 V | Standard Certificate |
| Bridge120-100mV | 3 calibration points: - Voltage at 0 V - Voltage at 0.1 V - Voltage at -0.1 V | Standard Certificate |
| Bridge120-10mV | 3 calibration points: - Voltage at 0 V - Voltage at 0.01 V - Voltage at -0.01 V | Standard Certificate |
| Bridge120-25mV | 3 calibration points: - Voltage at 0 V - Voltage at 0.025 V - Voltage at -0.025 V | Standard Certificate |
| CryoTemp | 2 calibration points: - Temperature at -80 °C - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| CTL2000 | 25 °C to 60 °C for Ambient channels, 0 mV for Thermocouple channels(No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| CurrentX12-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| CurrentX12-3000mA | 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| CurrentX12-30mA | 2 calibration points: - Current at 0 mA - Current at 25 mA | Standard Certificate |
| CurrentX16-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| CurrentX16-3000mA | 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| CurrentX16-30mA | 2 calibration points: - Current at 0 mA - Current at 25 mA | Standard Certificate |
| CurrentX4-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| CurrentX4-3000mA | 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| CurrentX4-30mA | 2 calibration points: - Current at 0 mA - Current at 25 mA | Standard Certificate |
| CurrentX8-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| CurrentX8-3000mA | 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| CurrentX8-30mA | 2 calibration points: - Current at 0 mA - Current at 25 mA | Standard Certificate |
| DHS Data Logging System | 4 calibration points: - Temperature at 140 °C - Temperature at 300 °C - Temperature at 250 °C - Temperature at 350 °C | Standard Certificate |
| EggTemp | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| EggTemp-RH | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| Element CO2 | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 1 calibration point: - CO2 at 400 ppm (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| Element HT | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| ETR101A | 2 calibration points: - Temperature at 25 °C - Temperature at 60.5 °C 1 calibration point: - Thermocouple temperature at 0 mV | Standard Certificate |
| Event101A | The Event101A has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| HiTemp140-1 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-2 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-2-TD | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-5.25 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-TD-5.25 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-5.25-TD-TSK | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-5.25-TSK | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-7 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-7-TSK | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-FP | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-FR | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-FR-TSK | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-PT-1 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-PT-1-TSK | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-PT-5 | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-PT-5-TSK | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140-M12 | 3 calibration points: - Resistance at 100 Ω - Resistance at 125 Ω - Resistance at 150 Ω | Standard Certificate |
| HiTemp140X2-FP-72-PT-1 | 2 calibration points each channel - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140X2-FP-72-PT-5 | 2 calibration points each channel - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140X2-TD-FP-72 | 2 calibration points each channel - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140X2-TD-PT-1 | 2 calibration points each channel - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| HiTemp140X2-TD-PT-5 | 2 calibration points each channel - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| LCS140 | 2 calibration points each channel - Temperature at 30 °C - Temperature at 140 °C | ISO/IEC 17025 Accredited Certificate |
| IRTC101A | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| Level1000 | Channel 1: 1 calibration point: - Temperature at 25 °C Channel 2: 2 calibration points: - Water level at 405 inH2O - Water level at 775 inH2O | Standard Certificate |
| LF101A | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| LNDS System | 1 calibration point: -Temperature 25 °C for the internal channel 3 calibration points: 0 mV for the Thermocouple channel -196°C, -80°C, 0°C | ISO/IEC 17025 Accredited Certificate |
| Lyotemp | 2 calibration points: - Temperature at -60 °C - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| MicroRHTemp | 1 calibration point: - Temperature at 25 °C Channel 2: 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25.5 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| MicroTemp | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| MicroTemp100 | 1 calibration point: - Temperature at 25 °C | ISO 17025 Accredited |
| Motion110 | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| Motor101A (all versions) | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| OctProcess-100mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| OctProcess-1mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 1 mA | Standard Certificate |
| OctProcess-25mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 24.5 mA | Standard Certificate |
| OctProcessV2-30mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 24.5 mA | Standard Certificate |
| OctProcessV2-160mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| OctProcessV2-3250mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| OctRTD | Each Channel 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| OctRTDTempV2 | Each Channel 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| OctTCTempV2 | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| OctTCTemp2000V2 | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| OctTemp (Serial Numbers through N1XXXX) | 25 °C for the internal sensor, 0 mV for the Thermocouple channels (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| OctTemp (Serial Numbers beyond N1XXXX) | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| OctTemp2000 | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| OctThermoVault | This product is a system, you must calibrate components separately. See OctTemp. | N/A |
| OctVolt-100mV | 2 calibration points: - Voltage at 0 V - Voltage at 0.1 V | Standard Certificate |
| OctVolt-15V | 2 calibration points: - Voltage at 0 V - Voltage at 15.2 V | Standard Certificate |
| OctVolt-2.5V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| OctVolt-30V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| OctVoltV2-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| OctVoltV2-3.2V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| OctVoltV2-32V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| pHTemp2000 | 2 calibration points: - Resistance at 100 Ω - Resistance at 140 Ω 2 calibration points: - pH voltage at 0 mV - pH voltage at 1000 mV | Standard Certificate |
| PR140 (All versions) | 0.1 bar, 0.5 bar, 1 bar, 1.5 bar, 2 bar, 2.5 bar, 3.5 bar, 4 bar, 4.5 bar and 5.0 bar at each of the following temperature points; 20 °C, 40 °C, 60 °C, 80 °C, 100 °C, 120 °C, 140 °C Certificate only displays 1 bar, 2.5 bar and 5 bar at 20 °C and 140 °C | ISO/IEC 17025 Accredited Certificate |
| PR1000-1000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 ps | ISO/IEC 17025 Accredited Certificate |
| PR1000-100-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-100-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-300-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-300-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-30-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-30-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-5000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-500-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000-500-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-1000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 ps | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-100-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-100-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-300-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-300-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-30-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-30-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-5000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-500-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PR1000IS-500-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-1000-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-100-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-100-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-300-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-300-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-30-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-30-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-5000-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-500-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PR2000-500-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRHTemp101A | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 25 % RH - Humidity at 75 % RH - Humidity at 50 % RH 2 calibration points: - Pressure (absolute) at 0.46 bar - Pressure (absolute) at 1.09 bar | Standard Certificate |
| PRHTemp2000 | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| Process101A-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| Process101A-20mA | 2 calibration points: - Current at 0 mA - Current at 24.5 mA | Standard Certificate |
| Process101A-3A | 2 calibration points: - Current at 0 mA - Current at 1000 mA ±10 mA | Standard Certificate |
| PRTC110-2inH2O | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (gauge) at 0.5 inH2O - Pressure (gauge) at 1.6 inH2O | Standard Certificate |
| PRTC110-5inH2O | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (gauge) at 1 inH2O - Pressure (gauge) at 4 inH2O | Standard Certificate |
| PRTC210-1000-PSIA | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | Standard Certificate |
| PRTC210-100-PSIA | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 80 psi | Standard Certificate |
| PRTC210-100-PSIG | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | Standard Certificate |
| PRTC210-300-PSIA | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | Standard Certificate |
| PRTC210-300-PSIG | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV(No data included on certificate) 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | Standard Certificate |
| PRTC210-30-PSIA | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | Standard Certificate |
| PRTC210-30-PSIG | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | Standard Certificate |
| PRTC210-5000-PSIA | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | Standard Certificate |
| PRTC210-500-PSIA | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | Standard Certificate |
| PRTC210-500-PSIG | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | Standard Certificate |
| PRTemp140 (All Versions) | 2 calibration points: - Temperature at 30 °C - Temperature at 140 °C 77 calibration points: 0.1 bar, 0.5 bar, 1 bar, 1.5 bar, 2 bar, 2.5 bar, 3.5 bar, 4 bar, 4.5 bar and 5.0 bar at each of the following temperature points; 20 °C, 40 °C, 60 °C, 80 °C, 100 °C, 120 °C, 140 °C Certificate only displays 1 bar, 2.5 bar and 5 bar at 20 °C and 140 °C for the pressure channel | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-1000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-100-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-100-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-300-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-300-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-30-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-30-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-5000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-500-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000-500-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000D-100 | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000D-30 | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000D-300 | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000D-500 | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-1000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-100-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-300-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-300-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-30-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-30-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28.0 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-5000-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-500-PSIA | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTemp1000IS-500-PSIG | 1 calibration point: - Temperature at 25 °C 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-1000-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-100-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-100-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-300-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-300-PSIA | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-30-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-30-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-5000-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-500-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000-500-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-1000-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-100-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-100-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 80 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-300-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-300-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 240 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-30-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-30-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 28 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-5000-PSIA | 2 calibration points: - Pressure (absolute) at 14.8 psi - Pressure (absolute) at 500 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-500-PSIA | 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| PRTrans1000IS-500-PSIG | 2 calibration points: - Pressure (gauge) at 0 psi - Pressure (gauge) at 400 psi | ISO/IEC 17025 Accredited Certificate |
| Pulse101A | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| QuadProcess-100mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| QuadProcess-1mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 1 mA | Standard Certificate |
| QuadProcess-25mA | Each Channel 2 calibration points: - Current at 0 mA - Current at 24.5 mA | Standard Certificate |
| QuadProcessV2-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| QuadProcessV2-3000mA | 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| QuadProcessV2-30mA | 2 calibration points: - Current at 0 mA - Current at 25 mA | Standard Certificate |
| QuadRTD | Each Channel 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| QuadRTDTempV2 | Each Channel 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| QuadTCTempV2 | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C | ISO/IEC 17025 Accredited Certificate |
| QuadTCTemp2000V2 | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C | ISO/IEC 17025 Accredited Certificate |
| QuadTemp (Serial Numbers through N1XXXX) | 25 °C for the internal sensor, 0 mV for the Thermocouple channels (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| QuadTemp (Serial Numbers beyond N1XXXX) | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C | ISO/IEC 17025 Accredited Certificate |
| QuadTemp2000 | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C | ISO/IEC 17025 Accredited Certificate |
| QuadThermoVault | This product is a system, you must calibrate components separately. See QuadTemp. | N/A |
| QuadVolt-100mV | Each Channel 2 calibration points: - Voltage at 0 V - Voltage at 0.1 V | Standard Certificate |
| QuadVolt-15V | Each Channel 2 calibration points: - Voltage at 0 V - Voltage at 15.2 V | Standard Certificate |
| QuadVolt-2.5V | Each Channel 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| QuadVolt-30V | Each Channel 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| QuadVoltV2-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| QuadVoltV2-32V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| Rain101A | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| RFC1000(all versions) | This device is not calibrated, declaration of conformance is available. | Declaration of Conformance |
| RFCO2RHTemp2000A | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 1 calibration point: - CO2 at 400 ppm (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| RFCurrent2000A-160mA | 2 calibration points: - Current at 0 mA - Current at 100 mA | Standard Certificate |
| RFCurrent2000A-20mA | 2 calibration points: - Current at 0 mA - Current at 24.75 mA | Standard Certificate |
| RFCurrent2000A-3A | 2 calibration points: - Current at 0 mA - Current at 1000 mA | Standard Certificate |
| RFOT | 2 calibration points: - Temperature at 15 °C - Temperature at 85 °C | ISO/IEC 17025 Accredited Certificate |
| RFPRHTemp2000A | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 25 % RH - Humidity at 75 % RH - Humidity at 50 % RH 2 calibration points: - Pressure (absolute) at 0.46 bar - Pressure (absolute) at 1.09 bar | Standard Certificate |
| RFPulse2000A | This device is not calibrated, declaration of conformance is available. | Declaration of Conformance |
| RFRHTemp2000A | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C - Humidity at 50 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RFRTDTemp2000A | 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| RFTCTemp2000A | 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C 1 calibration point: - Thermocouple temperature at 0 mV | ISO/IEC 17025 Accredited Certificate |
| RFTemp2000A | 1 calibration point: - Temperature at 25 °C | ISO17025 Accredited Certificate |
| RFVolt2000A 15V | 2 calibration points: - Voltage at 0 V - Voltage at 15.2 V | Standard Certificate |
| RFVolt2000A 160mVDC | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| RFVolt2000A 2.5 VDC | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| RFVolt2000A 30VDC | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| RHTemp1000 | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp1000Ex | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp1000IS | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp1000IS R1 | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp1000IS-SS | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp1000SS | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp101A | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RHTemp2000 | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| RTDTemp101 | 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| RTDTemp101A | 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| RTDTemp2000 | 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| RTDTempX Series | 3 calibration points: - Resistance at 50 Ω - Resistance at 150 Ω - Resistance at 100 Ω | Standard Certificate |
| Shock101-100 | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-100-EB | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-250 | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-250-EB | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-5 | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-50 | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-50-EB | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock101-5-EB | Validation only X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| Shock300 | 2 Calibration points: 15 g range shock X, Y and Z axis - (-11) g - 0 g 100 g range shock X, Y and Z axis - (-89) g - 0 g 300 g range shock X, Y and Z axis - (-89) g - 0g | Declaration of Conformance |
| State101A | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
| SVR101 | Validation only X, Y axis = 0 g and Z axis = 1 g | Standard Certificate |
| TC101A-MP | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| TC101A-ST | 2 calibration points: - Temperature at 25 °C - Temperature at 60.5 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| TC101A-TB | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| TCTemp1000 | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| TCTemp2000 | 1 calibration point: - Temperature at 25 °C 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| TCTempX Series | Each Channel 2 calibration points: - Temperature at 25 °C - Temperature at 60 °C Each Channel 1 calibration point: - Thermocouple temperature at 0 mV (No data included on certificate) | ISO/IEC 17025 Accredited Certificate |
| Temp1000 | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| Temp1000Ex | 1 calibration point: - Temperature at 25 °C" | ISO/IEC 17025 Accredited Certificate |
| Temp1000FP | 2 calibration points: -Temperature at 50 °C and 149 °C | Standard Certificate |
| Temp1000IS | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| Temp1000IS R1 | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| Temp1000IS-SS | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| Temp1000P | 2 calibration points: - Temperature at 30 °C - Temperature at 80 °C | Standard Certificate |
| Temp101A | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| TempRetriever | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| TempRetrieverRH | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| ThermAlert | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| ThermAlert-GB | 2 Calibration points: -Temperature at -10 °C and 70 °C | ISO/IEC 17025 Accredited Certificate |
| ThermAlert-P | 2 Calibration points: -Temperature at -10 °C and 70 °C | ISO/IEC 17025 Accredited Certificate |
| ThermAlert-RH | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| ThermoVault | This product is a system, you must calibrate components separately. See TC101A. | N/A |
| Titan S8 | 3 calibration points: - Current at 0 mA - Current at 20 mA - Current at 10 mA 3 calibration points: - Voltage at 0 mV - Voltage at 100 mV - Voltage at 50 mV 3 calibration points: - Resistance at 0 Ω - Resistance at 50000 Ω - Resistance at 100000 Ω 3 calibration points: - Resistance at 40 Ω - Resistance at 230 Ω - Resistance at 135 Ω 3 calibration points: - Voltage at 0 V - Voltage at 10 V - Voltage at 5 V | Standard Calibration without certificate |
| TransiTemp-EC | 1 calibration point: - Temperature at 25 °C | No Calibration |
| TransiTemp-EC-Multi | 1 calibration point: - Temperature at 25 °C | No Calibration |
| TransiTempII | 1 calibration point: - Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| TransiTempII-RH | 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C | ISO/IEC 17025 Accredited Certificate |
| TSR101-100 | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-100-EB | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-250 | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-250-EB | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-5 | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-50 | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-50-EB | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| TSR101-5-EB | Validation only, X, Y axis = 0 g and Z axis = 1 g | Declaration of Conformance |
| UltraShock (2019 Revison) (Serial Numbers starting with R12559) | 2 calibration point: - Temperature at 25 °C - Temperature at 30 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 750 mbar - Pressure (absolute) at 1000 mbar 2 Calibration points: 15 g range shock X, Y and Z axis - (-11) g - 0 g 100 g range shock X, Y and Z axis - (-89) g - 0 g 300 g range shock X, Y and Z axis - (-89) g - 0g | Standard Certificate |
| UltraShock (All Models Except 5 g) | Shock validated to: X and Y Axis = 0 g Z Axis = 1 g (No data included on certificate) 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO 17025 Accredited Temperature, Humidity and Pressure Declaration of Conformance for Shock |
| UltraShock EB (All Models Except 5 g) | Shock validated to: X and Y Axis = 0 g Z Axis = 1 g (No data included on certificate) 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO 17025 Accredited Temperature, Humidity and Pressure Declaration of Conformance for Shock |
| UltraShock 5 | Shock validated to: X, Y and Z Axis = -1 g and +1 g (No data included on certificate) 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO 17025 Accredited Temperature, Humidity and Pressure Declaration of Conformance for Shock |
| UltraShock 5 EB | Shock validated to: X, Y and Z Axis = -1 g and +1 g (No data included on certificate) 1 calibration point: - Temperature at 25 °C 3 calibration points: - Humidity at 50 % RH, Temperature at 25 °C - Humidity at 25 % RH, Temperature at 30 °C - Humidity at 75 % RH, Temperature at 25 °C 2 calibration points: - Pressure (absolute) at 14.75 psi - Pressure (absolute) at 28 psi | ISO 17025 Accredited Temperature, Humidity and Pressure Declaration of Conformance for Shock |
| ULT90-9 | This product is a system, you must calibrate components separately. See CryoTemp. | N/A |
| ULT90-15 | This product is a system, you must calibrate components separately. See CryoTemp. | N/A |
| VFC2000 | 2 calibration points: -Temperature at 20 °C and 25 °C 3 calibration points: Thermocouple channel -20°C, -10 °C, 5°C | ISO/IEC 17025 Accredited Certificate |
| Volt101A-15V | 2 calibration points: - Voltage at 0 V - Voltage at 15.2 V | Standard Certificate |
| Volt101A-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| Volt101A-2.5V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| Volt101A-30V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| VoltX12-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| VoltX12-3.2V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| VoltX12-32V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| VoltX16-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| VoltX16-3.2V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| VoltX16-32V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| VoltX4-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| VoltX4-3.2V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| VoltX4-32V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| VoltX8-160mV | 2 calibration points: - Voltage at 0 mV - Voltage at 100 mV | Standard Certificate |
| VoltX8-3.2V | 2 calibration points: - Voltage at 0 V - Voltage at 2.5 V | Standard Certificate |
| VoltX8-32V | 2 calibration points: - Voltage at 0 V - Voltage at 25 V | Standard Certificate |
| VTMS | 2 calibration points: -Temperature at 20 °C and 25 °C 3 calibration points: Thermocouple channel -20°C, -10 °C, 5°C | ISO/IEC 17025 Accredited Certificate |
| Wind101A | Device has a digital input signal and cannot be calibrated. A declaration of conformance can be provided. | Declaration of Conformance |
